Sun. Jul 21st, 2024
floor installation Melbourne

Embarking on a vinyl floor installation Melbourne project? You’re in for a flooring transformation that’s not only stylish but also durable and easy to maintain. Whether you’re a seasoned DIY enthusiast or a first-timer, a comprehensive checklist can be your best ally. It’s the roadmap that ensures every step is clear and every detail accounted for. 

In this guide, we’ve compiled an easy-to-understand checklist that covers everything from preparation to finishing touches. Follow along, and you’ll be on your way to achieving a flawless vinyl floor installation that will stand the test of time. Let’s get started!

  • Pre-Installation Preparation:

Before you start the floor installation Melbourne process, it’s crucial to prepare the area properly. Start by removing any existing flooring, including carpet, tile, or laminate. This will provide a clean slate for your new vinyl flooring. Next, ensure that the subfloor is clean and level. Sweep and vacuum the subfloor to remove any dirt or debris. If there are any high spots or unevenness, you may need to use a levelling compound to create a smooth surface. Repair any damages to the subfloor, such as cracks or holes, and allow it to dry completely before proceeding.

  • floor installation Melbourne Acclimation of Vinyl Flooring:

Vinyl flooring needs time to acclimate to its surroundings in order to minimise expansion or contraction post-installation. This is an important step to ensure that your vinyl flooring will not warp or buckle over time. Follow the manufacturer’s instructions regarding acclimation time and temperature requirements. Generally, the vinyl flooring should be left in the room where it will be installed for at least 48 hours to acclimate to the temperature and humidity conditions.

  • Subfloor Inspection:

Thoroughly inspect the subfloor for any imperfections before installing the vinyl flooring. Look for unevenness, dips, or moisture issues. Use a long, straight edge or level to check for any high or low spots. If you find any unevenness, you may need to use a levelling compound or plywood underlayment to create a smooth and level surface. Address any moisture problems before proceeding with the installation, as moisture can damage the vinyl flooring over time.

  • Measure Twice, Cut Once:

Accurate measurements are key to minimising waste and achieving a professional finish. Before you begin installing the vinyl flooring, take the time to measure the room carefully. Start by measuring the length and width of the room, including any irregularities or nooks. It’s important to measure the room at its widest and longest points to ensure that you have enough vinyl flooring to cover the entire space. Add 5-10% extra to your measurements to account for mistakes and future repairs. This will also ensure that you have enough vinyl flooring in case of any pattern repeats.

  • Proper Installation Techniques:

  1. a) Starting Point: Begin installing your vinyl flooring from the longest wall in the room or in an area that receives less foot traffic. This will make the installation process smoother and help to minimise any visible seams.
  2. b) Adhesive Application: Follow the manufacturer’s guidelines when applying adhesive to the subfloor. Use a notched trowel to apply the adhesive, ensuring even coverage. Start in a corner and work your way out, applying the adhesive in small sections at a time. It’s important to work quickly, as the adhesive may start to dry.
  3. c) Plank Placement: Lay each plank carefully, aligning them correctly with each other while maintaining consistent spacing along all edges. Use a tapping block and rubber mallet to ensure a tight fit between planks. It’s recommended to stagger the seams by at least 6 inches for added stability and aesthetics.
  4. d) Trimming and Cutting: Use appropriate tools like a utility knife or vinyl cutter for accurate trimming around corners, doorways, and obstacles. Measure and mark the vinyl flooring before making any cuts to ensure a precise fit. Take your time and make multiple light passes with the utility knife to avoid tearing or damaging the vinyl.
  5. e) Seaming: In some cases, you may need to seam individual pieces of vinyl flooring together. Properly overlap and seam the pieces using recommended methods, such as heat welding or using a seam adhesive. Follow the manufacturer’s instructions for seaming to ensure a secure and durable seam.
  6. f) Rolling for Adhesion: Once the entire vinyl flooring is laid, use a weighted floor roller to ensure proper adhesion and eliminate any air bubbles. Roll the floor in both directions to ensure full contact between the vinyl and the adhesive. This step is crucial to achieving a smooth and flawless finish.


By following this friendly checklist, you’re well on your way to achieving a flawless vinyl floor installation. Remember to take your time, measure accurately, and refer to manufacturer instructions throughout the process. 

If you’re unsure about any step, don’t hesitate to ask for help from a professional floor installation Melbourne company or a knowledgeable friend. Enjoy your newly installed vinyl flooring and relish in the satisfaction of a job well done!