Wed. May 22nd, 2024
leak detection sydney

One of the most important skills you need to master is leak detection Sydney when it comes to home maintenance and repair. Knowing where hidden water damage will present itself is a necessary part of the job.

If your pipe leak detection test is not working or you have a new issue that you need to fix, it can be beneficial to do an additional leak detection test. Have you ever had a situation where your repair crew was unsure about whether or not there is any undetected cracks? continue reading the blog to know more information on the different types of tests one can do to help remedy this problem.

How can leak detection be used?

Leak detection is a method used to find cracks or gaps in your home and test for any damage done by water. This morning or this evening, it could be the most helpful thing you can do before winter.

leak detection SydneyPros and Cons of Leak Detection Methods

Leak detection methods can be any of the three plates: wood, conductometric and infrared. Wood is used to find cracks that are less than 1/8 of an inch, and leak detection methods use a mixture of water and dish soap to temporarily neutralise chemicals in the wood. Conductometry is usually only used for very large holes, and a great amount of electricity is needed, making it impractical for everyday usage without the infrastructure needed. Infrared is useful because it scans the entire area with different wavelengths, identifying heat differences in materials.

Which method is best for you

There are many methods for doing a leak detection test depending on material types, locations of leaks, and the need for confidentiality.

What should you do during a test?

There are three main steps to do an electrical leak detection test. Before you start, make sure the battery is fully charged so that the tool will work properly. First, locate the designated breaker for a particular outlet and flip it on for about 5 minutes. Next, find the nearest live circuit breaker and switch off its power for around 10 seconds. Lastly, pick up one of the tested objects like a wall or light fixture, and use your tester on it. If you see any electricity leaking out after performing these steps, there is something wrong with either your tool or the wall in question.


Cracks and leaks are not just a sign of wear and tear, but can also be signs of more serious problems like water damage or mould. As long as you find the crack or leak quickly, you prevent additional issues from developing. To do a leak detection Sydney test for hidden cracks, follow these steps:
-Dampen a cloth with plain water or soapy water.
-Spray some cleaner into it.
-Wipe over the wall or ceiling where the leak is suspected to be.
-Report back any trouble spots and make repairs yourself if necessary.
hope the above information helped you to detect minor cracks and leaks to prevent future plumbing issues.