Tue. May 28th, 2024
water-resistant laminate flooring

When you’re shopping for an epoxy flake flooring Melbourne, it can be confusing to know what thickness means. And you might think that thicker is always better, but that’s not always the case! You need to look at three things when choosing an epoxy coating: how much money you want to spend; how big your space is; and if you need a tough floor or something more delicate. Here’s what they all mean:

THIN EPOXY COATING

You might be wondering what a thin epoxy coating is, or why it’s different from standard epoxy. The answer can be found in the thickness of a floor’s finish. A standard epoxy flake flooring Melbourne coating has a thickness between 2 and 4 mils (thousandths of an inch), while thin epoxies have a thickness between 1/2 and 3/4 mil-they’re just under one-third as thick as their full-bodied counterparts.

A thin epoxy floor coating is best suited for floors that aren’t subject to heavy wear, such as shop floors or patios. This type of flooring doesn’t have much traction, so it’s better left on surfaces where people won’t be walking around in shoes with heels or cleats like those used on sports fields. 

Thin epoxies are also not suitable for areas with heavy equipment such as forklifts and industrial carts because they don’t provide enough cushioning underfoot to protect against impact damage like dings and scratches caused by pits in the surface material itself (in this case concrete).

THICK EPOXY COATING

A thick epoxy coating has many advantages. The first is that it provides a smooth surface. The second is that it can be used as an adhesive to bond materials together, like wood or metal. 

It’s also resistant to chemical degradation and is not affected by many common chemicals or oils, which makes it useful in industrial applications where oil or other substances present might damage the flooring otherwise. 

                                                     

It also provides excellent abrasion resistance so that you don’t have to worry about your floor becoming scratched easily by people walking on it with shoes on (or dogs running around).

The downside of having such a thick coating is that there are some areas where this material may block air flow because moisture won’t be able to escape from underneath the layer of paint at all times during installation procedures–and if air cannot escape freely through cracks between sections then mould may develop underneath there instead! 

This could lead directly back into our previous point about how hard surfaces like these tend towards being slippery when wet…

SUPER THICK EPOXY COATING

The thickness of the epoxy flake flooring Melbourne coating is important to know because it can impact the durability and appearance of your floor. Thicker coatings will last longer, but they may not be as appealing. Lighter-coloured floors are more prone to showing imperfections in a coating than darker ones, which tend to hide flaws better.

The minimum acceptable thickness for a flooring coating is typically 1/8 inch (3mm). This will protect your floor from water damage and allow you to move furniture on top of it without damaging the surface or causing buckling. A thicker coating can be used if you have high traffic areas in your home, but remember that it won’t last as long if it’s too thick and heavy!

When you’re selecting the right epoxy floor for your needs, don’t forget to consider thickness. Thickness is measured in millimeters and it can range from 10mm to 30mm or more. You should know that thicker epoxies are stronger, more resistant to scratches and impact damage, but they also tend to cost more money.

Conclusion

When you’re buying an epoxy floor, make sure you’re getting the right thickness, so you have the strongest possible floor for your needs and budget.